3-Axis/ 5-Axis Full Servo Robot Manufacturer Provides 3-Axis Servo Robot, 5-Axis Full Servo Robot, Travel 1000-1300mm, for Injection Molding Machines (250-650 Ton).
Runma 1000-1300 Series traversing robot arm is applicable to all types of horizontal injection machine ranging from 250 to 650 ton for products and sprues take-out.
Single stage or telescopic type vertical arm, with product arm and runner arm, for two plate or three plate mold products take out.
X-, Y-, Z-axis are driven by AC servo motor, can realize products stacking up on any points inside the mold, as well as at X, Y, Z directions, can cut the runner by scissors driven and inset or embed the accessory by the cylinder.
| Model |
A |
B |
C |
D |
E |
F |
G |
H |
I |
J |
K |
L |
| RQ-1000WD(S3, S5) |
1430 |
\ |
500 |
1630 |
175 |
195 |
210 |
200 |
1050 |
440 |
1700 |
2500 |
| RQ-1200WD(S3, S5) |
1550 |
1740 |
| Model |
Applied to injection molding machine (ton) |
Travel (mm) |
Side posture angle (degree) |
Max load (including fixture) |
Time (sec) |
Driven way |
Working pressure (kgf/cm2) |
Air consumption (nl/cycle) |
Power |
Power consumption |
NW (kg) |
| up and down |
pull out |
cross traveling |
take-out |
empty loop |
| RQ-1000WD(S3, S5) |
250-450 |
1000 |
220-1050 |
1750 |
90 |
5 |
2 |
11 |
x, y, z AC servo motor |
5-7 |
8 |
AC220±10V 50/60HZ |
4.2 |
250 |
| RQ-1200WD(S3, S5) |
420-650 |
1200 |
220-1050 |
1750 |
2.2 |
260
|
在線客服
企業(yè)微信
點擊圖片查看原圖
